Hunter 21978 54 1912 Mission Manual User Manual

Type 2 ModelsType 2 ModelsType 2 ModelsForm# 41225-0120091204©2009 Hunter Fan Co.For Your Records andWarranty AssistanceFor reference, also attach you

1041225-01 • 12/04/09 • Hunter Fan CompanyAll wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are u

1141225-01 • 12/04/09 • Hunter Fan Company6-1. Holding the canopy, raise the fan o the hook.6-2. Raise the canopy and align the tabs in the can

1241225-01 • 12/04/09 • Hunter Fan Company3 • Assembling tbe Blades7-1. Insert blade into slot. Align the holes on the blade with the holes in th

1341225-01 • 12/04/09 • Hunter Fan Company3 • Assembling tbe Blades8-1. Looking up at the bottom of the fan trim. Locate the raised arrow on the

1441225-01 • 12/04/09 • Hunter Fan Company3 • Assembling tbe Blades8 • Aligning the Fixture Fitter (Continued)8-6. Plug the upper and lower plug

1541225-01 • 12/04/09 • Hunter Fan CompanyInstalling the Glass Bowl9-1. Locate the (3) pins at the bottom of the (3) anges on the plastic spacer

1641225-01 • 12/04/09 • Hunter Fan CompanyIn warm weather, use downward air ow patternIn cold weather, use upward air ow pattern10-1. Turn on el

1741225-01 • 12/04/09 • Hunter Fan CompanyProblem: Nothing happens; fan does not move.1. Turn power on, replace fuse, or reset breaker.2. Loosen

241225-01 • 12/04/09 • Hunter Fan CompanyTable Of ContentsPreparing the Fan Site . . . . . . . . . . . . . . . . . 31 • Getting Ready. . . . . .

341225-01 • 12/04/09 • Hunter Fan Company7’ Minimum Blades to Floor8’ Minimum Ceiling Height30” From Wall or Nearest ObstructionStep 1 - Choose th

441225-01 • 12/04/09 • Hunter Fan CompanyPreparing the Fan Site (continued) CAUTION: All wiring must be inaccordance with national and local elect

541225-01 • 12/04/09 • Hunter Fan CompanyInstaller’s Choice and Optional AccessoriesUnderstanding Mounting and Installer’s Choice®Hunter’s patente

641225-01 • 12/04/09 • Hunter Fan CompanyTo install a ceiling fan, be sure you can do the following:• Locate the ceiling joist or other suitable s

741225-01 • 12/04/09 • Hunter Fan Company CAUTION: To avoid possible electrical shock, before installing your fan, disconnect the power by turning

841225-01 • 12/04/09 • Hunter Fan Company3-1. To assemble the housing to the hanger adapter, align the three raised tabs on the hanger adapter wi

941225-01 • 12/04/09 • Hunter Fan Company WARNING: Fan may fall if not assembled as directed in these installation instructions.4-1. Unbundle t