Hunter 22515 8 Opal Glass Schoolhouse Globe User Manual download pdf (Page 5)

Installing the Light Kit on Fans With Non-Removable Switch Housing and No

Center Hole

1. Uninstall the two screws from the switch housing.

2. In the light kit ﬁtter, ensure that the two black wires connected with a wire

plug are coiled into the top cavity of the light kit ﬁtter. Remove the wire connectors from

the two wires in the switch housing labeled “Connect Light Here” or “For Light Use.” One

wire is white and the other wire is black/white striped.

Connect the black/white striped wire from the switch housing to the black wire from the

light kit. Connect the white wire from the switch housing to the white wire from the light

kit. Secure all wire connections using wire connectors.

To connect the wires, hold the bare metal leads together and place a wire connector over

them, then twist the wire connector clockwise until tight.

CAUTION: Be sure no bare metal wires or wire strands are visible after making

the connections.

3. Attach the light kit to the switch housing using the two enclosed long screws and the

lock washers on the red tag. Screw the light kit into the two tabs in the switch housing.

Securely tighten the two screws.

WARNING: Improper installation could cause the light ﬁxture to fall, or result

in electrical shock or personal injury.

4. Go to the instructions for Installing the Bulbs, Chains, and Globe.

Step 1

Step 2

Step 3

Hunter original and non-

removable switch housing,

no center hole

Switch

Housing

Plate

Wires

and Wire

Connectors

Light Kit

Fitter

Enclosed

Screw and

Washer

Screw

43519-01 r050807 5

1 2 3 4 5 6

No comments

Hunter 22515 8 Opal Glass Schoolhouse Globe User Manual Page 5