Hunter 99023 Bowl Light Fitter User Manual download pdf (Page 6)

MA003-01 • 07/24/13

1.888.830.1326

6

TYPE-B ASSEMBLY INSTRUCTIONS

Using the single pin connectors, connect

the black or blue wire from the fan to the

black wire from the light kit. Connect the

white wire from the fan to the white wire

from the light kit.

If your fan does not have pin connectors on

the wires coming from the switch housing,

install the wiring harness provided. Using

the provided wire connectors connect the

white wire from the fan to the white wire

from the wire harness and connect the

black or blue wire from the fan to the black

wire from the wire harness.

Feed the light kit wires through the

center hole in the switch housing. Then

attach the switch housing to the light kit

by installing the light kit screws into the

bottom of the switch housing.

Lift the light kit assembly up so that the

screw holes in the lower switch housing

line up with the holes in the upper switch

housing. Install the switch housing

screws and tighten securely.

Switch

Housing

Screw

Wire

Connector

Switch

Housing

Do not allow the light kit to hang

only by the wire connections!

Light Kit

Screw

Switch

Housing

1 2

3 4

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments