Hunter Low Profile IV Plus - 52" Installation Manual download pdf (Page 12)

42882-01 • 12/14/10 • Hunter Fan Company

Steps 7-1 – 7-3

Housing

Assembly

Screw

Upper

Switch

Housing

Step 7-4

Lower

Switch

Housing

Plug

Connector

WARNING: Use only the light xture supplied with this fan model.

7-1. To attach the upper switch housing, partially install two #6-32 x

3/8” housing assembly screws into the switch housing mounting

plate.

7-2. Align the keyhole slots in the housing with the housing assembly

screws.

7-3. Turn the housing counterclockwise until the housing assembly

screws are rmly situated in the narrow end of the keyhole slots.

Install the remaining #6-32 x 3/8” screw into the housing. Tighten

all three screws rmly.

CAUTION: Make sure the upper switch housing is securely attached

to the switch housing mounting plate. Failure to properly attach and

tighten all three assembly screws could result in the switch housing

xture falling.

7-4. To attach the lower switch housing, connect the upper plug

connector from the motor to the lower plug connector in the

lower switch housing assembly.

Note: Both plug connectors are polarized and will only t together

one way. Make sure the connectors are properly aligned before

connecting them. Incorrect connection could cause improper

operation and damage to the product.

7-5. Place the lower switch housing assembly over the upper switch

housing. Align the side screw holes in the upper and lower switch

housings. Attach the lower switch housing to the upper switch

housing with three #6-32 x 3/8” housing assembly screws.

7 • Completing Your Installation With a Multi Staked Light Fixture

Housing

Assembly Screw

Plug

Connector

Detail

1 2 ... 7 8 9 10 11 12 13 14 15

Comments to this Manuals

No comments

Hunter Low Profile IV Plus - 52" Installation Manual Page 12

Comments to this Manuals

Related products and manuals for Household fans Hunter Low Profile IV Plus - 52"