Hunter 28789 64 Torrence User Manual

Type 2 ModelsType 2 ModelsType 2 ModelsForm# 45086-0120110922©2011 Hunter Fan Co.For Your Records andWarranty AssistanceFor reference, also attach you

1045086-01 • 09/22/2011 • Hunter Fan CompanyAll wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are

1145086-01 • 09/22/2011 • Hunter Fan Company6-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket.6-2. Raise the c

1245086-01 • 09/22/2011 • Hunter Fan CompanyHunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).7-1. Your

1345086-01 • 09/22/2011 • Hunter Fan Company8-1. To attach the lower switch housing, connect the upper plug connector from the motor to the lower

1445086-01 • 09/22/2011 • Hunter Fan Company9 • Operating the Remote Control and Mounting the Holder9-1. e remote has individual buttons for se

1545086-01 • 09/22/2011 • Hunter Fan CompanyIn warm weather, use downward air ow patternIn cold weather, use upward air ow pattern10-1. Turn o

1645086-01 • 09/22/2011 • Hunter Fan CompanyProblem: Nothing happens; fan does not move1. Turn power on, replace fuse, or reset breaker.2. Loosen

245086-01 • 09/22/2011 • Hunter Fan Company© 2011 Hunter Fan CompanyYour new Hunter® ceiling fan is an addition to your home or oce that will pro

345086-01 • 09/22/2011 • Hunter Fan CompanyPreparing the Fan Site7’ Minimum Blades to Floor8’ Minimum Ceiling Height30” From Wall or Nearest Obstr

445086-01 • 09/22/2011 • Hunter Fan CompanyPreparing the Fan Site (continued) CAUTION: All wiring must be in accordance with national and local el

545086-01 • 09/22/2011 • Hunter Fan CompanyInstaller’s Choice and Optional AccessoriesUnderstanding Mounting and Installer’s Choice®Hunter’s paten

645086-01 • 09/22/2011 • Hunter Fan CompanyTo install a ceiling fan, be sure you can do the following:• Locate the ceiling joist or other suitable

745086-01 • 09/22/2011 • Hunter Fan Company2-1. Drill two pilot holes into the wood support structure through the outermost holes in the outlet b

845086-01 • 09/22/2011 • Hunter Fan Company3-1. To assemble fan to hang down from a at or angled ceiling, place the canopy and canopy trim ring

945086-01 • 09/22/2011 • Hunter Fan CompanyReceiver DIP switchesTransmitter JumpersCFL Toggle SwitchCFL Receiver 1Receiver 2Example DIP Switch Set