Hunter 99050, 99051,99052, 99053, 99054, 99055 Decorative User Manual download pdf (Page 5)

MA007-01 • 07/26/13

1.888.830.1326

TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)

After the light kit is mounted to the fan, feed

the pull chains from the fan’s switch housing

and the light kit through the grommeted

holes in the base of the light kit. Extension

chains are provided, if necessary. Both pull

chains must line up with the grommeted

holes to operate properly.

Grommeted

Hole

Pull Chain

Indentation

Tab

Installing the bulb - Install a bulb into each

of the sockets. When necessary, replace

with bulbs of the same type and wattage.

Socket

Installing the Pull chain pendant -

Attach the pull chain pendant to the

end of the short chains coming from the

switch housing and the light kit. Turn

power on. Your installation is complete.

Installing the globe (sold separately)- Position the

indentations in the outer rim of the globe so that they

line up with the tabs on the inside surface of the light

xture rim. Carefully lift the globe up inside the light

xture as far as it will go. Rotate the globe in a clockwise

direction until it is held tightly in place by the four tabs.

1 2 3 4 5 6 7 8 9 10

No comments

Hunter 99050, 99051,99052, 99053, 99054, 99055 Decorative User Manual Page 5