Hunter 99050, 99051,99052, 99053, 99054, 99055 Decorative User Manual download pdf (Page 8)

MA007-01 • 07/26/13

1.888.830.1326

8

TYPE-C ASSEMBLY INSTRUCTIONS

Feed the wires through the center hole in

the switch housing. Then using the single

pin connectors, connect the black or blue

wire from the fan to the black wire from

the light kit. Connect the white wire from

the fan to the white wire from the light kit.

Lift the lower switch housing up so

that the screw holes line up with the

holes in the upper switch housing.

Install the switch housing screws and

tighten securely.

Lift the light kit up, tucking the wires into

the hole in the switch housing. Install the

center stem of the light kit into the lower

switch housing by turning the threaded

rod clockwise into the threaded hole.

Continue turning until tight.

Upper

Switch

Housing

1

3

2

4

Threaded

Rod

Lower

Switch

Housing

Switch

Housing

Screw

Wire

Connector

Switch

Housing

If your fan does not have pin connectors

on the wires coming from the switch

housing, install the wiring harness

provided. Using the provided wire

connectors connect the white wire from

the fan to the white wire from the wire

harness and connect the black or blue

wire from the fan to the black wire from

the wire harness.

Do not allow the light kit to hang

only by the wire connections!”

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments