Hunter 28784 Installation Guide download pdf (Page 11)

45039-01 • 12/17/10 • Hunter Fan Company

Step 6-1 (Detail)

Grommet

Blade Assembly

Screws

Use with grommet

Use without grommet

Hunter fans use several styles of fan blade irons (brackets that hold the

blade to the fan).

6-1. Your fan may include blade grommets. If your fan has grommets,

insert them by hand into the holes on the blades.

6-2. Attach each blade to a blade iron using three blade assembly

screws. If you used grommets, the blades may appear slightly loose

after screws are tightened. is is normal.

6-3. Remove the blade mounting screws and rubber shipping bumpers

from the motor. Note: Some blade mounting screws are installed

in the motor to secure shipping blocks.

6-4. For each blade, insert one blade mounting screw through the

blade iron, and attach lightly to the fan. Insert the second blade

mounting screw, then securely tighten both mounting screws.

Blade

Mounting

Screw

Steps 6-1 – 6-2

Step 6-4

Note: e blades on this fan have been treated

with Hunter’s Dust Armor protection, making

the blades less likely to attract dust and dirt.

Use a dry or slightly damp lint free cloth to

clean the blades. Do not use a furniture polish

or any other cleaners that leave any residue, as

they will damage the protective Dust Armor

on the blades.

6 • Assembling the Blades

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Hunter 28784 Installation Guide Page 11