Hunter 20593 Installation Guide download pdf (Page 2)

45072-01 • 10/21/10 • Hunter Fan Company

• READ AND SAVE THESE INSTRUCTIONS.

• Use only Hunter replacement parts.

• To reduce the risk of personal injury, attach the fan directly to the

support structure of the building according to these instructions, and use

only the hardware supplied.

• To avoid possible electrical shock, before installing your fan, disconnect

the power by turning o the circuit breakers to the outlet box and

associated wall switch location. If you cannot lock the circuit breakers in

the o position, securely fasten a prominent warning device, such as a tag,

to the service panel.

• All wiring must be in accordance with national and local electrical codes

and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualied

electrician.

• To reduce the risk of personal injury, do not bend the blade attachment

system when installing, balancing, or cleaning the fan. Never insert foreign

objects between rotating fan blades.

• To reduce the risk of re, electrical shock, or motor damage, do not use

a solid-state speed control with this fan. Use only Hunter speed controls,

which are solid state.

• is product conforms to UL STD 507 and is certied to STD C22.2

No.113.

• Wash your hands after your fan installation is complete.

WARNING!

How to Use is Manual:

Be sure to read the entire manual before beginning installation and save

any extra parts for future use. is manual will help you install, operate,

and maintain your new fan. ese instructions are designed to make

installation and assembly as simple and ecient as possible. Each step has

four components:

1. Each step is illustrated at the top of the page. e steps are numbered

on the side of each illustration.

2. Text instructions beneath each illustration describe the procedure for

each step.

3. On the right side of each image, you will nd a life-sized illustration

of necessary hardware. At the bottom of each illustration, there is a

small image that depicts the tools needed for each step. Each image

correlates to the following legend:

Screwdriver, Phillips-head

Screwdriver, Flat-head

Drill with 3,5 mm bit or

masonry bit (

used only for

concrete ceilings)

Wrench

Hammer

Tape Measure

Allen Wrench

1 • Getting Ready

1 2 3 ... 23

Comments to this Manuals

No comments

Hunter 20593 Installation Guide Page 2

Comments to this Manuals

Related products and manuals for Household fans Hunter 20593