Hunter 20593 Installation Guide download pdf (Page 7)

45072-01 • 10/21/10 • Hunter Fan Company

You can assemble your fan for standard or angled mounting as shown in

steps 3-1 – 3-3. For low prole mounting (ceilings less than 8 feet high), go

to steps 3-6 – 3-9 on the next page.

To assemble fan to hang down from a at or angled ceiling, place the

canopy (3) and canopy trim ring (4) around the adapter so that they rest

on the fan assembly and feed the wires from the fan through the downrod

(7).

Loosen the square head setscrew on the adapter to install the pipe and

ball assembly. Note: When the pipe and ball assembly is fully installed, 2-3

threads on the pipe (7) will still be visible; this is normal. Securely retighten

the setscrew with a wrench or pliers.

Note: Make sure all the wires are on the same side of the metal dowel pin

inside the downrod.

CAUTION:

e motor cover

adapter has a

special coating

on the threads.

Do not remove

this coating; the

coating prevents

the pipe/ball

assembly from

unscrewing. Once

assembled, do not

remove the pipe/

ball assembly.

Standard

Mounting

Style

Angled

Mounting

Style

Low Prole

Mounting

Style

3 • Assembling and Hanging the Fan

3.1

3.33.2

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

No comments

Hunter 20593 Installation Guide Page 7